How to run the test and check the results
  • 15 Sep 2023
  • 1 Minute to read
  • Contributors
  • Dark
    Light

How to run the test and check the results

  • Dark
    Light

Article Summary

Run now

Clicking the "Run now" button in the upper right corner of the scenario page will run the scenario using the environment shown in the "Last Recording Conditions" section.

en-run-now

Run a test plan

There are two ways to run a test plan

  1. Open the test plan and click the "Run" button in the upper right corner.
    01_en.png
  2. Use API.

Notes on the parallel execution environment

Please note that the test may fail if parallel execution is enabled and the following special test scenarios are included in the test plan.

  • "Test scenarios that require the specification of execution order, such as" Test scenario A must be executed after test scenario B or the test will fail.
  • "Test scenarios that depend on the nature of the application, e.g.," Test Scenario A and Test Scenario B do not behave as expected when executed simultaneously.

Check the test results

  1. Select a specific one from the list of test results
    02_en.png

  2. Click each step.
    03_en.png

  3. Check the previous results (at the time of recording or previous successful results) against the current results.
    04_en.png


Was this article helpful?

What's Next
Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.