How to run the test plan and check the results
  • 20 Apr 2022
  • 1 Minute to read
  • Contributors
  • Dark
    Light

How to run the test plan and check the results

  • Dark
    Light

How to execute the test plan

Once the scenario recording is done and the test plan is created, the next step is to run the test plan so that we can make sure that the new build is OK. Autify for Mobile provides two ways to run the test plan.

  1. Manual
    01_en.png

  2. API
    Please refer to this document for more information about running with the API.

Notes on the parallel execution environment

Please note that the test may fail if parallel execution is enabled and the following special test scenarios are included in the test plan.

  • "Test scenarios that require the specification of execution order, such as "Test scenario A must be executed after test scenario B or the test will fail.
  • "Test scenarios that depend on the nature of the application, e.g., "Test Scenario A and Test Scenario B do not behave as expected when executed simultaneously.

How to check the test results

  1. Select a specific one from the list of test results
    02_en.png

  2. Press each step.
    03_en.png

  3. Check the previous results (at the time of recording or previous successful results) against the current results.
    04_en.png


Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.